I do know that you need to turn the muffler clamp around to keep the center stand from hitting it.
ok newbie here
has anybody bought a stand on Ebay ??
good to know. I've been searching for some with with an Asian bike that is 1.5" lower; based on the nc750 dcts also with a lower center stand and side stand.There is a centerstand available for our bikes. It is for the NC700S (a model we don't get in the US).
It is available from WebbikeJapan
here's a link http://japan.webike.net/ps/08M70MGSJ10/#!search&p.k=08M70MGSJ10
You will need the stopper to go with it. Do not install or use the stand without the stopper.
Stand part no.: 08M70-MGS-J10.
Stopper no.:35-21-01
There is no other centerstand for our bikes that I am aware of. Shipping usually takes less than 2 weeks.
Installation is not difficult except for attaching the springs-it is a bit tough and uses a lot of your vocabulary.
I understand the stopper is backordered until maybe July. Unless you are talented enough to fabricate one, don't get impatient and install the stand without one.
just saw this. 30mm shorter and has to be perfect. I will measure; the bolt holes/angle and fix the asian bike problem. part 2 is to find a shorter center stand; yes they are 1.5" shorter; lifting it up on a tall center stand might be a chore !!There is a centerstand available for our bikes. It is for the NC700S (a model we don't get in the US).
It is available from WebbikeJapan
here's a link http://japan.webike.net/ps/08M70MGSJ10/#!search&p.k=08M70MGSJ10
You will need the stopper to go with it. Do not install or use the stand without the stopper.
Stand part no.: 08M70-MGS-J10.
Stopper no.:35-21-01
There is no other centerstand for our bikes that I am aware of. Shipping usually takes less than 2 weeks.
Installation is not difficult except for attaching the springs-it is a bit tough and uses a lot of your vocabulary.
I understand the stopper is backordered until maybe July. Unless you are talented enough to fabricate one, don't get impatient and install the stand without one.